Etchant Get

In intraoral prosthesis or orthodontic treatment, NANOFIL etchant gel is used to treat the surfaces of teeth,metal, ceramic, and other prostheses to remove the contaminated layer, to rough surface and improve their surface properties

SCOPE: Enamel/dentine etching in the context of the total etch technique

product details

product description

etchant gel is specifically formulated for surface pretreatment in prosthodontic rehabilitation and orthodontic applications, effectively conditioning enamel, dentin, metal alloys, and ceramic substrates. Through controlled demineralization and micro-roughening mechanisms, this system eliminates organic contaminants while creating optimized surface topography for enhanced interfacial adhesion, primarily indicated for total-etch protocol implementation in dental hard tissue preparation.

SCOPE: Enamel/dentine etching in the context of the total etch technique

Advantages

● Gel-like consistency

● Short time for etching

● Multiple concentration is available

● Dark blue color, easy to identify

● Easy to rinse

Specifications

Color	Dark blue
Model	AT-37
Specifications	2.5ml /syringe
Phosphoric acid contents	37%

Etchant Gel Instructions for Use

Product description
NANOFIL^? Etchant Gel is an etching agent based on ortho phosphoric acid. It is used to etch enamel and condition dentine in the context of adhesive filling therapy.

Specification
AT-20, AT-33, AT-35, AT-37

Composition
NANOFIL^? Etchant Gel AT-37 (AT-20, AT-33, AT-35) contains 37% (20%, 33%, 35%) phosphoric acid. The product further contains thickening agents, pigments and water.

Indications
Enamel etching and enamel/dentine etching in the context of the total etch technique prior to the adhesive bonding of:
● Composite and compomer restorations
● Indirect restorations (e.g. inlays, crowns,? bridges,?veneers)
● Sealants

Contraindications
● Application to dentine close to the pulp (dentin?layer less than 1 mm in thickness)
● Do not use in case of known hypersensitivity to?Etchant Gel.

Side effects
This product or one of its components may in particular cases cause hypersensitive reactions.

Interactions
Liner and base materials, such as calcium hydroxide, may be dissolved by the acid, depending on their type and composition.

Warnings/Precautions
NANOFIL? Etchant Gel AT-20 contains 20% phosphoric acid and can cause irritation, Etchant Gel AT-33, AT-35, AT-37 contains 33%, 35%, 37% phosphoric acid respectively and can cause chemical burns. Etchant Gel may irritate eyes. Avoid contact with gingiva, skin, eyes or neighboring teeth. In case of contact with oral mucosa, rinse thoroughly with plenty of water. If swallowed, thoroughly rinse mouth with water and then drink plenty of water. Consult a physician. In case of contact with skin, thoroughly rinse with soap and water. In the event of contact with eyes, rinse thoroughly with water and seek medical advice. Wear suitable protective gloves. Avoid skin contact. Wear protective clothing. Wear safety glasses/face protection. Immediately remove clothing contaminated with NANOFIL? Etchant Gel.
● Only to be used by dentists and for its intended use.
● Store out of reach of children.
● Only used before the expired date.

Application

Prior to treatment, carefully clean tooth with fluoride-free polishing paste. The use of rubber dam is recommended.
Disposable brush and syringe needle should be used when we apply the Etchant Gel.

1. Starting from the beveled enamel areas, apply

NANOFIL? Etchant Gel to the entire cavity surface, including the dentine. Ensure that the enamel is etched for at least 20 sec and no more than 30 sec, and that the dentine is conditioned for at least 15 sec and no more than 20 sec. When using AT-33, AT-35, AT-37, pay special attention to complying with the dwell time on the dentine. Reducing the time less than 15 sec in these areas is permissible to avoid over etching. If desired, only apply Etchant Gel to the enamel and let set for a maximum of 30 sec. Etch unprepared enamel, e.g. in case of fissure sealing, for at least 30 sec and no more than 60 sec. In case of fluoridated enamel, etching for no more than 60 sec may also be required.
Caution: In case of deep cavities, we recommend covering the dentine near the pulp with a calcium hydroxide preparation and a base (e.g. glass ionomer cement) prior to etching.

2. Use a water sprayer to completely rinse o? Etchant Gel for 20 sec. The cavity must be completely free of any remnants.

3. Dry the cavity with oil-free air (do not dry out dentine!). The etched enamel surface should appear chalky white. In case of contamination of the tooth surface (e.g. with saliva), the etching must be repeated (for a maximum of 10 sec dwell time).

4. Perform further treatment with adhesive and composite in accordance with manufacturer directions.

5. In case of cross-infection, after used disposable items should be discarded in container designed for medical waste disposal.

6. Remaining etching gel may be discharged with wastewater if highly diluted with water or neutralized.

Storage conditions
Store at temperatures below 25°C (77°F).

Expiration date and batch number
See note on syringe/package.

Warranty
3 years

Package specification
2.5mL/package, 5mL/package
Specific content see the note attached in the package.